|
|
|
|
|
|
Kuryakyn Turn Signal Adapter Studs, Hollow & Threaded, 3/8" to 5/16", 2288
|
|
List Price: $12.99
Our Price: $12.99
|
|
|
Kuryakyn Turn Signal Adapter Studs
Adapter Studs are hollow & threaded 3/8”-16 on one end
& 5/16”-24 the other for mounting Silver Bullets or Mini Bullet lights with 3/8” threaded mounting holes in a 5/16” hole. These come in handy for fender strut applications. The 5/16” diameter end should be cut to length to ensure
adequate clearance.
Part Number K-2288
Adapter Studs, 3/8" to 5/16" (pr)
|
|
|
|
|
|
|
|
|
|
Kuryakyn 8-pin Hardwire Adapter, 4832
|
|
List Price: $14.99
Our Price: $14.99
|
|
|
This splice-in 8-pin Amp connector is required to install Panacea Taillights or a Küryakyn Run-Turn-Brake Controller.
Part Number:K-4832
8-Pin Hardware Adapter (ea)
Fits ’91-’95 Softails, ’91-’96 Dynas, ’91-’96 Electra Glides, Tour Glides, Road Kings, or ’91-’98 Sportsters
|
|
|
|
|
|
|
|
|
|
Kuryakyn Load Equalizer Adapter, Multifit, 4837
|
|
List Price: $14.99
Our Price: $14.99
|
|
|
This handy adapter allows splice-free installation of Küryakyn load equalizers equipped with 3-pin connectors.
Part Number K-4837
Load Equalizer Adapter (ea)
’97-’12 Electra Glides, ’98-’12 Road Glides (except ’09 FLTRSE, '10-;12 FLTRX, '12 FLTRXSE), ’06-’09 Street Glides, ’97-’12 Road Kings, ’96-’10 Softails (except ’08-’10 FXCW/C, ’10 FLSTSE), ’97-’11 Dynas (except ’09-’11 FXDB, ’10-'11 FXDWG), ’99-’03 Sportsters
|
|
|
|
|
|
|
|
|
|
Kuryakyn 2 Amp Load Equalizer, 4810
|
|
List Price: $18.99
Our Price: $17.99
Savings: $1.00
|
|
|
Universal Load Equalizer for use when stock turn signals are replaced with L.E.D. or other low-draw lights. One required for each pair of lights.
Part Number K-4810
2 Amp Load Equalizer
THIS IS A UNVERSAL FITMENT FOR 12 VOLT MOTORCYCLE LIGHTING
SYSTEMS- USUALLY ADEQUATE FOR ONE PAIR OF LOWDRAW TURN
SIGNALS
|
|
|
|
|
|
|
|
|
|
Kuryakyn Smoke Fender Tip Lens & Bulb, Rear Lens & Red Bulb, 4823
|
|
List Price: $19.99
Our Price: $17.99
Savings: $2.00
|
|
|
Kuryakyn Rear Fender Tip Lens & Red Bulb
Ditch your stock lenses & show some style with the Smoke Lens Kits. Turn signal bulbs are red or amber incandescent & fender tip bulbs are red or amber L.E.D.
Fender Tip lens & Bulb Kits
Includes fender tip lens with L.E.D. bulb.
Part Number K-4823
Rear Fender Tip/Red Bulb Kit (set)
’86-’12 Electra Glides, Road Glides, Tour Glides, Road Kings, Trikes, & FLST Models with Fender Tip Lights
Note: Does not fit ’09-’12 FLHTC, FLHTCU, FLHTK or Trikes
|
|
|
|
|
|
|
|
|
|
Kuryakyn Smoke Fender Tip Lens & Bulb, Front Lens & Amber Bulb, 4824
|
|
List Price: $19.99
Our Price: $17.99
Savings: $2.00
|
|
|
Kuryakyn Front Fender Tip Lens & Amber Bulb
Ditch your stock lenses & show some style with the Smoke Lens Kits. Turn signal bulbs are red or amber incandescent & fender tip bulbs are red or amber L.E.D.
Fender Tip lens & Bulb Kits
Includes fender tip lens with L.E.D. bulb.
Part Number K-4824
Front Fender Tip/Amber Bulb Kit (set)
’86-’12 Electra Glides, Road Glides, Tour Glides, Road Kings, Trikes, & FLST Models with Fender Tip Lights
|
|
|
|
|
|
|
|
|
|
Kuryakyn Chrome Plated Stainless Steel P-Clamp, 1-1/8"-1-1/4", Turn Signal Mount, Black, 4023
|
|
List Price: $20.99
Our Price: $18.89
Savings: $2.10
|
|
|
Kuryakyn Chrome Plated Stainless Steel P-Clamp, Turn Signal Mount, Black
One slick little clamp, our chrome plated stainless steel P-Clamp has many uses. It works great for mounting Silver Bullets or other lights to frame tubes or engine guards. Its hinged design makes installation easy. Mounting is very secure because our clamp is secured to the tubing by both a flat head screw and the fastener used to attach the accessory. The clamp has a 5/16" mounting hole.
Part Number K-4023 1-1/8” – 1-1/4” P-Clamp, Black (ea)
|
|
|
|
|
|
|
|
|
|
Kuryakyn Tribal License Plate Mounting Hole Cover
|
|
List Price: $21.99
Our Price: $19.99
Savings: $2.00
|
|
|
Kuryakyn Tribal License Plate Mounting Hole Cover
With so many riders using our Side Mount License Plate Mounts or relocating their license plate below the taillight, we needed to come up with an appealing way to cover the exposed holes left in the fender after the stock license plate bracket is removed. Both covers install in minutes
& completely cover the footprint left by the stock mount.
Part Number K-3159 Tribal License Plate Mounting Hole Cover (ea)
All H-D Models with standard 3-bolt fender mounted license plate bracket (Both styles also cover the fourth hole found on some Dyna and Sportster Models)
|
|
|
|
|
|
|
|
|
|
Kuryakyn Chrome Plated Stainless Steel P-Clamp, 39mm/41mm, Turn Signal Mount, Chrome, 4014
|
|
List Price: $22.99
Our Price: $20.69
Savings: $2.30
|
|
|
Kuryakyn Chrome Plated Stainless Steel P-Clamp, Turn Signal Mount
One slick little clamp, our chrome plated stainless steel P-Clamp has many uses. It works great for mounting Silver Bullets or other lights to frame tubes or engine guards. Its hinged design makes installation easy. Mounting is very secure because our clamp is secured to the tubing by both a flat head screw and the fastener used to attach the accessory. The clamp has a 5/16" mounting hole.
Part Number K-4017 39mm/41mm P-Clamp, Chrome (ea)
|
|
|
|
|
|
|
|
|
|
Kuryakyn Chrome Plated Stainless Steel P-Clamp, 1-1/2"-1-5/8", Turn Signal Mount, Chrome, 4017
|
|
List Price: $22.99
Our Price: $20.69
Savings: $2.30
|
|
|
Kuryakyn Chrome Plated Stainless Steel P-Clamp, Turn Signal Mount
One slick little clamp, our chrome plated stainless steel P-Clamp has many uses. It works great for mounting Silver Bullets or other lights to frame tubes or engine guards. Its hinged design makes installation easy. Mounting is very secure because our clamp is secured to the tubing by both a flat head screw and the fastener used to attach the accessory. The clamp has a 5/16" mounting hole.
Part Number K-4017 1-1/2” – 1-5/8” P-Clamp, Chrome (ea)
|
|
|
|
